Need help?Do you have a question about the Lincoln Electric Torchmate 4 00 Series and is the answer not in the manual?
General| Model | Torchmate 400 Series |
|---|---|
| Control System | Torchmate CAD/CAM Software |
| Cutting Method | Plasma |
| Table Size | 4' x 4' |
| Input Voltage | 115V/230V |
| Input Phase | Single Phase |
| Voltage Requirements | 115V/230V |
| Max Material Thickness | Up to 1" (25.4 mm) depending on plasma cutter |
| Amperage | Dependent on plasma cutter used |
| Cut Capacity | Dependent on plasma cutter used |
| Weight | 600 lbs (272 kg) |
| Amperage Range | Dependent on plasma cutter used |
| Dimensions | 64" x 64" x 40" (1.6 m x 1.6 m x 1.0 m) |
| Duty Cycle | Dependent on plasma cutter used |
To Next Page
