Lincoln Electric VANTAGE 400 CE

To Next Page

VANTAGE 400 (CE)

OPERATOR’S MANUAL

IM889-A

March, 2010

Safety Depends on You

Lincoln arc welding and cutting

equipment is designed and built

with safety in mind. However,

your overall safety can be

increased by proper installation ...

and thoughtful operation on your

part. DO NOT INSTALL, OPER-

ATE OR REPAIR THIS EQUIP-

MENT WITHOUT READING

THIS MANUAL AND THE SAFE-

TY PRECAUTIONS CONTAINED

THROUGHOUT. And, most

importantly, think before you act

and be careful.

For use with machines having Code Numbers:

Equipped with VRD (VOLTAGE REDUCTION DEVICE)

See Installation and Operation sections for an explanation.

11296, 11297, 11463, 11464

• Sales and Service through Subsidiaries and Distributors Worldwide •

Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com

• World's Leader in Welding and Cutting Products •

Need help?

Do you have a question about the Lincoln Electric VANTAGE 400 CE and is the answer not in the manual?

Lincoln Electric VANTAGE 400 CE Specifications

General

Max Output	400 A
Fuel Type	Diesel
Output Range	20 - 400 A
Output Current Range	20 - 400 A
Type	Engine Driven Welder/Generator
Dimensions	1524 mm (60 in)
Processes	Stick, TIG, MIG
Input Power	N/A (Engine Driven)
Engine Power	18.5 kW (24.8 HP)
Input Phase	N/A (Engine Driven)
Input Frequency	N/A (Engine Driven)
Duty Cycle	60%
Generator Output	12 kW peak, 10 kW continuous