Lincoln 1162-080-A User Manual

48 pages

To Next Page

P/N: L371076

REV: 10.19.09

Lincoln Foodservice Products, LLC

1111 North Hadley Road

Fort Wayne, Indiana 46804

Telephone: 260.459.8200

Fax: 888.790.8193

Technical Support: 800.678.9511

lincolnfp.com

PARTS & SERVICE MANUAL

Impinger II Express Series

Domestic Models

MODELS:

Please note that the model numbering system changed

March 2007. The chart below shows the old model

numbering system and its matching new model number.

Old Model Number

→

New Model Number

1116-080-A (or A1)

→

1116-00z-U-Kxxxx

1116-062-8R

→

1116-00z-U-Kxxxx

1116-023-8

→

1116-00z-U-Kxxxx

1117-080-A (or A1)

→

1117-00z-U-Kxxxx

1117-023-8

→

1117-00z-U-Kxxxx

1130-080-A (or A1)

→

1130-00z-U-Kxxxx

1130-08H-A

N/A

1131-080-A (or A1)

→

1131-00z-U-Kxxxx

1131-08H-A

N/A

1132-080-A (or A1)

→

1132-00z-U-Kxxxx

1132-08H-A

→

1172-00z-U-Kxxxx

1132-002-8

→

1174-00z-U-Kxxxx

1132-023-8

→

1132-00z-U-Kxxxx

1133-080-A (or A1)

→

1133-00z-U-Kxxxx

1133-08H-A

→

1173-00z-U-Kxxxx

1161-080-A

→

1131-00z-U-Kxxxx

1162-080-A

→

1132-00z-U-Kxxxx

N/A

1178-00z-U-Kxxxx

Other manuals for Lincoln 1162-080-A

Service Manual40 pages

Questions and Answers:

H
hannahandersonAug 7, 2025
What to do if there is no automatic control box cooling in Lincoln 1162-080-A?
- D
  donnatravisAug 7, 2025
  If there is no automatic control box cooling in your Lincoln Oven, begin by checking the circuit breakers and resetting them if needed. Make sure the power plug is firmly in the receptacle and measure the incoming power supply, calling the power company if necessary. Inspect the cooling fan thermostat (it closes at 120°F and opens at 100°F). With the cooling fan thermostat pre-heated, check for continuity; if the switch is open, replace the thermostat. Check for 120VAC at the cooling fan. If no voltage is present, trace the wiring back to the cooling fan thermostat. If voltage is present, and the motor doesn't run, check for opens, shorts, or grounds. With the power off, check for a locked rotor.
D
Daniel ToddAug 18, 2025
How to troubleshoot no control box cooling on a Lincoln Oven?
- S
  sarah41Aug 18, 2025
  If your Lincoln Oven's control box isn't cooling, start by checking the circuit breakers and resetting them if required. Ensure the power plug is firmly in the receptacle and measure the incoming power, contacting the power company if needed. Check the main power switch for continuity between terminals, replacing the switch if necessary. Check for 120VAC at the cooling fan. If no voltage is present, trace the wiring back to the power switch. If voltage is present but the motor doesn't run, check for opens, shorts, or grounds. With the power off, check for a locked rotor.