Stability Control and Traction Control with RSC Features
EnabledEnabledEnabledNot illuminatedButton pressed again after
deactivation
Disabled
4
DisabledDisabledIlluminatedButton not pressed and the
transfer case is switched
to 4WD Low
3
1
The traction control system may still be enabled but with higher entry thresholds compared to the full system. The electronic stability control
entry thresholds are higher compared to the full system.
2
When you press and hold the button for more than 5 seconds the indicator lamp blinks for three seconds.
3
Your vehicle may or may not have this feature available. When you select 4WD low the stability control light illuminates and all stability control
with RSC features are disabled.
4
Engine traction control and two-wheel spin brake traction control functions are disabled. Single wheel spin traction control is always enabled.
192
Navigator (TB5) Canada/United States of America, enUSA, First Printing
Stability Control
To Next Page
Loading...
Need help?
General
