OWNER/OPERATOR MANUAL
Page
Section
- E35
- 73G
Form 404243
MAR - 2011
Models 94100, 94100M© and 94300, (Series “A”)
Model 94500 (Series “B”)
BARE REEL
SPECIFICATIONS
Maximum working pressure
Model 94100 (Bare Reel) 1000 PSI
Model 94300 (Bare Reels) 4000 PSI (See Note 1)
Model 94500 (Bare Reel) 8000 PSI (See Note 1)
Fluid type
Models 94300 Oil
Models 94500 Grease
Models 94100 Air & Water (See Note 2)
Models 94100M Air & Water (See Note 2 & 3)
Fluid Inlet
Models 94300 & 94100 1/2” NPT (Female)
Models 94500 3/8” NPT (Female)
Fluid outlet
Models 94300, 94100 & 94100M© 1/2” NPT (Female)
Models 94500 3/8” NPT (Female)
Sheave width 4-1/2”
Sheave diameter 19-1/2”
Drum diameter 12-5/8”
Overall width 6-5/8”
Overall height 23-3/4”
Overall depth 19-3/4”
Maximum hose capacities (Including hang down):
1/4” ID. Air/water hose 60 ft.
3/8” ID. Air/water hose 60 ft.
1/2” ID. Oil hose 50 ft.
RECOMMENDED REPLACEMENT HOSE SPECIFICATIONS
• Air/water low pressure hose with 250 psi working pressure and
1/2” NPT pipe thread for attachment to reel.
• Oil hose medium pressure hose with 1500 psi working pressure
and 1/2” NPT pipe thread for attachment to reel.
• Grease high pressure hose 1/4” I.D. with 5000 psi working pres-
sure and 3/8” NPT pipe thread for attachement to reel.
• Grease high pressure hose 3/8” I.D. with 4000 psi working pres-
sure and 3/8” NPT pipe thread for attachement to reel.
NOTE: Exceeding these capacities voids warranty. Refer to DE-
LIVERY HOSE INSTALLATION for proper hose to reel assembly.
DESCRIPTION
The 94000 Series Reel is designed for hose storage wher-
ever longer length delivery hose is required. The reel can be
installed as a single unit or in multiple congurations.
Reel features include a reel latch that automatically locks at
desired positions as the hose is extended and releases with a
short pull on the hose
OWNER/OPERATOR RESPONSIBILITY
It is the owner/operator responsibility to properly use and
maintain this equipment.
The instructions and warnings contained in this manual shall
be read and understood by the owner/operator prior to operat-
ing this equipment.
If an owner/operator does not under stand English, the con-
tents of this manual shall be explained in the owner/operator
native language to assure the owner/operator comprehends.
It is the owner/operator responsibility to maintain the legibility
of all warning and instruction labels.
The owner/operator shall retain this manual for future refer-
ence to important warnings, operating and
maintenance instructions.
NOTE 1: Operating maximum working pressure should not
exceed the pressure rating of the installed hose.
NOTE 2: Bare reel hose models 94100 & 94100M© are
designed to be corrosion resistant when used in applica-
tions using water, antifreeze solutions (ethylene Glycol or
Polypropylene Glycol) and windshield wash solutions (Typi-
cally methyl alcohol diluted with water).
NOTE 3: Bare reel hose model 94100M is equipped with
enhanced spring to support a meter.
Systems which will be dispensing uids under pressure may
need to be protected by using a thermal relief kit, which will
safely limit the pressures caused by thermal expansion.
Please contact your local Lincoln distributor and refer to
Service Page Section K5, Page 31 for more details. Failure
to include thermal relief protection may cause damage not
covered under Lincoln’s warranty policy.
© Indicates change
©
©
To Next Page
Need help?
General
