Lincoln SKF ContiMaster - EC Declaration of Incorporation Following Machinery Directive 2006;42;EC

To Next Page

To Previous Page

- 2 -

951-171-037

Version 02

EC Declaration of incorporation following machinery directive 2006/42/EC, annex II, part 1 B

The manufacturer, SKF Lubrication Systems Germany GmbH, Walldorf Facilities, Heinrich-Hertz-Straße 2-8, D - 69190 Walldorf, hereby declares that the

partly completed machinery

Designation: Hydraulically driven barrel pump to supply lubricants

Type: ContiMaster

Part number: 509-33996-1

Year of construction: See type identification plate

complies with the following basic safety and health requirements of the EC machinery directive 2006/42/EC at the time when first being launched in the

market.

1.1.2 · 1.1.3 · 1.3.2 · 1.3.4 · 1.3.7 · 1.3.8.2 · 1.5.3 · 1.5.6· 1.5.8 · 1.6.1 · 1.7.1 · 1.7.2 · 1.7.3

The special technical documents were prepared following Annex VII part B of this directive. Upon justifiable request, these special technical documents can be

forwarded electronically to the respective national authorities. The person empowered to assemble the technical documentation on behalf of the manufacturer

is the head of standardization, See manufacturer's address.

Standard Edition

DIN EN ISO 12100 2011

DIN EN ISO 809 2012

The partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with

the previsions of machinery directive 2006/42/EC and any other applicable directives.

Walldorf, 14/08/2017

Jürgen Kreutzkämper

Manager R&D Germany

SKF Lubrication Business Unit

Stefan Schürmann

Manager R&D Hockenheim/Walldorf

SKF Lubrication Business Unit

EC Declaration of incorporation