Lindy Switch User Manual

 




45
Clear IP access control
This option removes all entries from the IP access control feature within the
LINDY KVM IP.
What is IP access control?
The IP access control feature (configurable by a remote admin user) allows
certain network address ranges to be denied access to the LINDY KVM IP. If set
incorrectly, it is possible to exclude all network users and so this option provides
an emergency recovery point.
To clear IP access control
1 Use the local keyboard and log on as the ‘admin’ user.
2 Press (hotkeys may be set differently).
3 Select ‘Configuration’.
4 Select ‘Network
configuration’.
5 Highlight the ‘Clear IP
access control’ option
and press .
Network Config
Net Mask 255.255.255.0
192.168.42.154
No
Gateway
VNC Port
HTTP Port
5900
80
Clear IP Access Control
CancelSave
IP Address
00:0F:58:00:00:04
Use DHCP
MAC Address

Lindy Switch Specifications

General

Brand	Lindy
Model	Switch
Category	Switch
Language	English