FUNC lights FS1-FS5 ash. Please select one for editing . The
display ashes 3-character abbreviations for models assigned to
FS1-FS5:
2. Press the desired stomp you wish to edit (FS1–FS5).
The selected FS switch is bright (indicating it is selected) and the
other four go dim; the VOL and WAH LEDs go dark.
The full model name appears in the display for ~1 second, after
which the most recently accessed of its parameters appears and
the big encoder’s LED ring represents its value.
Analog Chorus
After ~1 second...
CHO:Speed 1.09 Hz
3. Repeatedly press the same switch to cycle through all parameters.
Pressing a dierent switch displays the full model name for ~1
second before displaying its most recently accessed parameter.
4. Move the expression pedal to adjust the selected parameter’s value.
Press bank up or down to adjust the value in ne increments.
5. Press TAP to exit Live Edit mode.
Press & hold currently lit “Channel” switch A – D to enter save mode.
Select new Bank if necessary. Press & hold a channel switch to save
in that location.
To Next Page
Loading...