Line 6 POD HD300 User Manual

Setup Details
1•6
6. Press the pedal firmly all the way forward to click the toe switch and hold this
position for a few seconds until you see the next prompt.
7. As instructed, move the pedal to the minimum “heel” position and press the D
switch.
8. Move the pedal to the maximum forward position (but do not click the toe switch)
and press D.
9. At this point, the pedal is calibrated but not saved. If calibrated correctly, moving
the pedal will display values from 0-127 on the LCD screen.
7. Press D switch once again to save if all is correct to perform the save.
Please wait while your device re-initializes itself and the Presets screen is displayed.
The process is now complete!

Line 6 POD HD300 Specifications

General

Amp Models	16 HD amp models
Display	LCD
Type	Multi-Effects Processor
Number of Models	16 amp models
Computer Connectivity	USB
Footswitches	4
USB	Yes
Power Supply	Included
Effects Types	Distortion, modulation, delay, reverb
Presets	128
Cabinet Models	16 cab models
Expression Pedal	Built-in expression pedal
Effects	80+ M-class effects