GETTING SET UP • Re-Amping with PODxt Pro
3 • 17
When you want to make use of that digitally recorded dry guitar signal, send it out of
your recorder to one of POD
XT Pro’s digital inputs, and select that INPUT as AES LEFT
has been selected here:
Don’t change (increase or decrease) the playback level of the dry guitar track; send it
out to POD
XT Pro at exactly the same level it was recorded at. Then connect PODxt
Pro’s analog or digital outputs to your recorder, and you record processed guitar sound
while making whatever tone changes best fit the needs of your final production.
FEATURE FOCUS
PODxt Manual Book RevC.book Page 17 Friday, August 29, 2003 5:43 PM
To Next Page
Loading...
