425W
Servicio de Atención al Cliente:: lineaplus@lineaplus.eu 943 493 555
OPERATING INSTRUCTIONS
To begin to use the heater, please follow these instructions:
1. Check the heater to be sure it is not damaged.
2. DATE, TIME SETTING
Turn on the side switch ensure the power is on, press the ,turn on the heater, press the “SET” for 3
seconds for timetable setting, the hour code flash, press “△”or “▽” to set the hour from 01-23,press “SET”,
the minute code flash, press “△”or “▽”to set the minute from 00-59.Press “SET”, the week code flash,
press “△”or “▽”to set week from MO-SU, press “ SET” to save or 10 seconds automatically save.
3. Power switch
Press turn on the heater, LCD display the room temperature, time table( no clock sign),week
condition, the heater under normal mode, press turn off the heater, LCD without display.
4. “M” switch
Press “M” to select normal mode or weekly mode setting, under normal mode, heater without timer setting.
5. Temperature switch
Press press “M”, heater under normal mode, press “SET”, LCD
Flash room temperature, press “△”or “▽” to set the temperature you need, press set to save or 10
seconds automatically save. (The temperature you set must higher than the room temperature
6. Timer
Press , press “M”, select the week code，the LCD display week(MO-SU) on top, and display
on the left corner, press “SET”, the temperature code flash, press ”△”or “▽” to set the temperature you
need, press “SET”, the screen will showing “ON” to start timer setting, the hour code flash, set the timer
start hour, press “△”or “▽”to select the start hour you need, the minute code flash, to set the timer on
minute. Press “SET”, the screen will showing “OFF” to stop the timer setting, the hour code flash, set the
timer for stop hour, press “△”or “▽” to select the stop hour you need, the minute code flash to set the
timer on minute for stop. The stop time must later than start time, if the stop time is earlier than start time,
the timer is out of function for this date.
7. Stop the timer mode
Press “M” to select timer between weekly timer mode or normal mode.
8. Adaptive function.
The process of heating equipment in the room, open doors and Windows of the room or room ventilation
system, equipment has its own judgment without heating, when environment temperature decline for more
than 3 ℃, in order to save energy, heating power; If you need to continue heating, you need to close the
doors and Windows and turn on the power of the device, so that the equipment can enter the working state
and continue heating.
To Next Page
Loading...