8
Film threading diagram -
Auto memory function
The linea has an auto memory function, that
means if you work on the same roll of lm,
the temperature and speed will be set to the
same settings as the last time the machine
was used.
Re-t the plastic safety guard -
With the guard and/or tray not
in position you can put the drive
switch to run and then by pressing
the load button the machine will
run forward when the load button
is released the machine will stop
Please note: There is a trip safety
switch which means that the
machine will not work if the feed tray
and safety guard are not correctly in
place.
Re-t the feed tray
Lift top roller by turning roller
pressure handle anti-clockwise
Re-t the feed tray
NOTE: SAFETY TRIP SWITCH
Ensure the roller pressure is in the
‘LOCK’ position when running the
machine
Take a piece of cardboard insert it in
between the rollers (in the nip)
To Next Page
Loading...
