Linear RE-1 - Connecting to RE-1 with Windows Vista; Initiating Remote Connection

17
1. CLICK ON "DIAL" START THE CONNECTION
CONNECTING TO THE RE-1 WITH WINDOWS VISTA™
2. THE MODEM WILL
DIAL THE NUMBER
3.
ONLY WHEN CONNECTING REMOTELY, AFTER
THREE RINGS, CLICK "CANCEL", WAIT 10 SECONDS
THEN REPEAT STEPS 1-3. THE RE-1 WILL ANSWER THE
PHONE ON THE SECOND CALL ATTEMPT
5. AFTER CONNECTING, SWITCH TO YOUR MICROSOFT
INTERNET EXPLORER BROWSER SOFTWARE AND
ENTER THIS ADDRESS:
http://192.168.20.10/re1.html
4. THE RE-1 WILL
VERIFY THE USERNAME
AND PASSWORD