4
Touch Panel and Keys
Touch panels enable to select settings by soft touch or to scroll displays by
swipe.
Keys
Operations Function
[ ]
Turn ON/OFF the power.
Press it longer to turn off the power.
[RUN] Start monitoring, measuring or testing operation.
[STOP] Stop monitoring, measuring or testing operation.
[MENU] Return to the top menu.
[ESC]
Return to the previous display. Stop renewing data
display while measuring.
[ ▲ ] , [ ▼ ]
Scroll one data line.
Move the cursor on the condition setting.
[ ] , [ ]
Scroll one character of data.
Change the setting on the condition setting.
[ENTER] Apply selected settings.
[0] ～ [F]
Enter numerical values. Select the data send table
number.
[TOP/DEL]
Jump to the top of data. Delete the entry indicated by
the cursor.
[END/X]
Jump to the end of the screen.
Enter the data of "Don’ t Care” .
[SHIFT]
Press to use the expanded alternate function of each
key.
[SHIFT]+[ESC] Save the screen image to the storage device.
[SHIFT]+[RUN] Brighter the LCD back light.
[SHIFT]+[STOP] Darker the LCD back light.
[ENTER]+[TOP/DEL]+[ ] Initialize settings. Clear all.
[SHIFT]+[STOP]+[ ] Start the rmware loader.
*This booklet uses [+] mark, when two keys need to be pressed at the same time.
▲
▲
To Next Page
Loading...
