16
▲
▲
Simulation Function
You can execute a communication test for a device in development by
sending/receiving data by the analyzer depending on the selected mode.
ڦ Registration of Transmission Data
Select the simulation function at "Operation mode" of [MENU], and then touch
"Tx-data registration" to display the transmission data table.
Shortcut key
［
MENU
］
,[9]
Up to 160 types of data can be registered
in the 160 tables of 0 to 9 groups (each
group has 16 tables). Touch the table and
group to register the data in it.
Input the data to be transmitted in HEX by [0] to [F].
Copy and paste of the data are available by [ENTER], [
], and
［
］
.
By touching "PE/MP", the data on the
cursor turns to be parity error or multi-
processor bit, and by touching it again it
returns to be the original one.
You can input text by touching "Text
input".
Input the text by capital letter or symbol
and touch [ENTER] or "OK", then the
input text line is inserted to the cursor
position.
Touch " " to display menus such as ll
data set, copy table, buer copy. Touch
each item to execute.
To Next Page
Loading...