5
Initial Settings
Press [ ] to turn on the power. Select language and set data & time.
*The top screen displays the model name.
Press [MENU] to set the initial
settings. Swipe the screen to set all
settings.
Touch the setting item or press
[ENTER] key after selecting the item
by [▲] [▼] keys.
Touch "File operation" to save the settings or measured data.
Shortcut key
［
MENU
］
,[C]
The left top of the screen indicates
the storage device.
The filename extension ".DT" represents measured data file and ".SU"
represents settings le.
Touch [ ] to change the storage device (SD or USB) to ler saved les,
or to ler the display by selecting the le type.
Double tap on the folder to check the les in the folder.
To Next Page
Loading...
