LineEye LE Series

To Next Page

To Previous Page

Interface

Select a measurement port of analyzer.

Shortcut key

　［

］

,[1]

For Simulation, select DTE or DCE

mode and polarity.



For Monitoring, polarity has to be set as well.

Function

Select a function.

Shortcut key

　［

］

,[7]

→[Monitor Function] (P13)

→[Simulation Function] (P16)

→[BERT Function] (P19)

Select a mode for each function.

Select "ONLINE" for normal use of

monitoring.

"Depending on the function, touch

"Advanced settings" or press

[ENTER] to congure the operational

condition.



LE-2500XR does not support TREND mode of the monitor function, BUFFER mode and

PROGRAM mode of the simulation function.

Touch "Tx

data registration" to register the data to be used in the simulation

function.

LineEye LE Series - Page 8