Link EXT100-eARC User Manual

Introduction
Overview
This product is an eARC audio-only extender kit. It can transmit eARC/ARC
or alternative S/PDIF audio up to 100m/330ft from TV back to centralized
AVR. The kit supports full eARC capabilities up to Dolby Atmos. It also
supports full eARC function and is backward compatible with 5.1CH ARC. It
also features bi-directional IR, RS232, and CEC pass-through between the
eARC transmitter and receiver.
Features
 Supports transmitting eARC/ARC audio up to 100m/330ft over a single
Cat 5e/6 or above cable.
 The eARC audio supports article-based audio formats like Dolby Atmos
and DTS:X, and also supports lossless audio formats like Dolby TrueHD
and DTS HD Master.
 Provides alternative S/PDIF audio return channel, which can be set
through a simple 2-pin DIP switch.
 Multiple control methods, including bi-directional IR, RS232 and CEC
between transmitter and receiver.
 Powered via Micro USB. Both transmitter and receiver could be powered
by 5V USB power.
 Firmware upgradable via RS232 port.
Package Contents
 1 x Transmitter
 1 x Receiver
 1 x Power Adapter (DC 5V 1A)

Link EXT100-eARC Specifications

General

Brand	Link
Model	EXT100-eARC
Category	Extender
Language	English