18
1. Power: Please make sure all devices are powered on (the source, extender set
and display).
2. Indicator: Please make sure LED indicators of the transmitter and receiver are
normal according to user manual.
3. Devices: Please make sure picture can be shown normally when connecting
source to display devices directly.
4. Cable: Unplug and
plug in HDMI/Cat X cable or try another HDMI/Cat X cable.
• Please make sure the specific cable length is within the transmission range
listed in below table based on different resolutions.
Resolution and Transmission Range
1080P
4K@60 420
4K@30 444
4K@60 444
HDMI IN 49ft 33ft 10ft
HDMI OUT 49ft 33ft 16ft
Cat 5e/6 197ft 115ft 115ft
Cat 6a/7 230ft 131ft 131ft
• Cat 5e/6/6a/7 cable is recommended, do not use Cat 5 cable. Please make
sure the two connectors of one Cat X cable are the same standard (EIA/TIA
568B).
5.
Compatibility: Please test other source and display devices to determine if it is
a compatibility issue.
Cable
Resolution
Trouble Shooting
Troubleshooting Steps
To Next Page
Loading...
Need help?
General
