Installation Guide
12 18-HD95D1-1C-EN
Step 4: Once software is downloaded to your
device, you can now push that update
to the Link system.
NOTE: You will need the Mac ID and
password that is found on the back
of the System Controller or on the front
of this install guide.
Step 5: Press and hold the button on the right-
hand side of the System Controller for
at least 6 seconds.
Step 6:
At this point, switch to your mobile
device’s WiFi settings.
Step 7:
Connect to hotspot name hvac_XXXXXX
(the X’s here refers to the last 6
characters of the MAC ID of the system
available in that spot).
Step 8: Select hotspot and enter password
from System Controller label.
NOTE: The password is case sensitive
and is NOT the same as the MAC ID.
Step 9: Once your device is connected to
the controller’s hotspot, please return
to the Diagnostics App and find the
screen shown below and follow
onscreen prompts.
To Next Page
Loading...
Need help?
General