9
Vacuum Tweezers
The vacuum tweezers are used to manipulate the
glass sample slides onto the silver block to pre-
vent fingerprints on the glass and scratching the
surface of the silver block when using standard
fine tip metal tweezers.
The System is supplied with a Vacuum Tweezers
Kit which consists of a Vacuum Pump (1) and
tweezers (2).
Connect the tubing at the end of the tweezers to
the Regulator Valve (3) connection.
Use the dial on the valve to adjust the vacuum for
the tweezers.
Use a finger to block the hole of the tweezers to
pick up a sample cover slip with the suction cup.
Release the finger to drop the sample cover slip.
1
2
To vacuum pump To tweezers
3
To Next Page
Loading...
