Need help?Do you have a question about the Linkam Scientific Instruments HFS600E-PB4 and is the answer not in the manual?
General| Brand | Linkam Scientific Instruments |
|---|---|
| Model | HFS600E-PB4 |
| Category | Laboratory Equipment |
| Language | English |
Guides for cleaning and maintaining the stage.
Safe practices for using liquid nitrogen for cooling.
Critical safety information regarding stage pressure limits.
General guidelines for safe operation of the equipment.
Explanation of safety symbols used in the manual.
Detailed technical specifications for the THMS600 stage.
Description of the THMS600 stage, controller, and cooling pump.
Identifies all parts of the main stage assembly.
Details the parts that make up the stage lid.
Procedure for attaching the stage to a dovetail substage.
Guidance on adjusting the microscope condenser for optimal viewing.
Loading samples using the quartz crucible and carrier.
General procedure for window assembly and disassembly.
Instructions for replacing windows in the stage lid.
Instructions for replacing windows in the stage bottom.
Diagnosing problems related to the stage's cooling performance.
Troubleshooting failure to cool down to -196°C.
Resolving condensation and ice formation on the upper window.
Addressing condensation on the sample or lid underside.
Technical specifications for the pressure stage variant.
Description of pressure system setups.
Identifies components of the PS stage assembly.
Details parts of the PS lid assembly.
Technical specifications for the FTIR600 stage.
Overview of the FTIR600 stage and its system.
Instructions for attaching the base stand.
Guide to connecting the gas purge valve and tubing.
Technical specifications for the ellipsometry stage.
Description of the ellipsometry stage system.
Identifies components of the THMSEL600 stage.
Details parts of the THMSEL600 lid.
Instructions for assembling the top window.
Instructions for assembling the side windows.
Instructions for assembling the bottom window.
Technical specifications for the geology stage.
Overview of the geology stage system.
Sample preparation using the G7T holder.
Technical specifications for the biological cryo-stage.
Description of the BCS196 cryo-stage system.
Identifies components of the BCS196 stage.
Details parts of the BCS196 lid.
Troubleshooting the sample holder's retaining catch.
Stage and probe specs for HFS600E-PB4/PB2.
Overview of the HFS600E-PB4/PB2 system.
Identifies components of the HFS600E-PB4 stage.
Details parts of the HFS600E-PB4 lid.
Procedure for detaching the probe from the stage.
Instructions for connecting the BNC wire.
How to position the probe using its magnetic base.
Procedure for modifying the probe needle's length.
Guidance on bending the probe needle tip.
Instructions for assembling the HFS600 lid window.
Instructions for assembling side windows.
Instructions for assembling the bottom window.
To Next Page
