Software Operation
Sample Loading
• Turn on the computer, and log in
– Username = dpuser
– Contact DP staff for the password
– Or, use the sector’s LDAP account
• The start-up screen (lower left) will appear
– Select “Linkam from the dropdown menu
– Click “Start” to start the IOC and medm
• Use the EPICS control screen (lower right) to set rate
(
o
C/min) and desired temperature.
– Pump speed is generally set to “Automatic.”
– To adjust the y-axis on the strip chart display, right-
click, then select “PV Limits.”
Tzero Press, often used
with DSC
Quick Guide - 2
TS1500
DSC
To Next Page
Loading...
