14
TCP/IP
Configure IP—Select Automatic Configuration or Static IP Address.
Server IP—Enter an unused IP address from the address range used on your LAN.
Gateway—Enter the gateway for IP Server.
Subnet mask—Enter the subnet mask for the IP address.
Primary DNS server—Enter the DNS Address.
Secondary DNS server—Optional.
VLAN Tagging—Enter tag of your VLAN.
Radio
Radio mode—Choose a radio mode
Channel width --Choose 20 MHz, 40 MHz or 80 MHz
Channel—Choose Auto or a channel from 1-5
TX Power—Choose the strength of signal when access point is transmitting
To Next Page
Loading...
