Linksys LAPAC1200C User Manual

95
Auto Channel
Auto Channel
Access point scans available Wi-Fi channels and
changes the channel if better network performance is
possible. Disabled by default.
Scan Day
Choose the day of the week when Auto Channel scans
Wi-Fi channels. You may choose specific days or have
the access point scan and select the best channel
daily.
Scan Time
Choose the time of day when Auto Channel performs
scan.
Scan Trigger
Because Auto Channel will change the channel if it
finds a better one, you can choose when to allow a
scan.
•
Immediately – Scan according to the day/time
specified.
•
No Clients – Scan only if no clients are
connected to the wireless radio. If there are
clients connected, the access point will
complete the Auto Channel operation the next
scheduled time when no clients are
connected.
Current Channels
Type
Member type of the access point. It can be Master,
Slave or Backup Master.
Location
Where the access point is physically located
IP Address
IP address of the access point.
Wireless Radio
1 stands for 2.4Ghz radio, and 2 stands for 5Ghz
radio.
Status
Status of the wireless radio. It can be Active or
Inactive.
Channel
Current channel number of the wireless radio.
Locked
Select if you feel the current channel is the best for
that radio.

Linksys LAPAC1200C Specifications

General

Color	multi, white
Wi-Fi Speed	1200 gigabits per second
Wireless Standard	ac, n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	802.1x supplicant; mac-based acl; rogue ap detection; ssid-to-vlan mapping
Ports	other, rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.12 pounds