Linksys MAX-STREAM MR9600 - Product Overview

3
Product Overview
Status light—Gives you information about the router’s operation.
Status light description
Status
Blue (blinking)
Starting up—Wait for the router to finish starting up.
Purple
Ready for setup—Open the Linksys app to complete setup.
Purple (blinking)
Setup in progress—Follow instructions in the app.
Blue
Connected to internet—Router is online, everything is good.
Yellow
Weak connection
(child node only)
Red
No internet from modem—Not online, check with your ISP for service
interruptions.
Red (blinking)
Disconnected
•
Child node: too far from a working node
•
Parent node: unplugged from the modem
WPS light description
Status
Off
No WPS activity
White (blinking)
WPS in progress (blinks for up to 2 minutes)
Orange (blinking)
WPS error (blinks for 1 minute)
White (solid) WPS success (goes off after 5 seconds)