What to do if callers can't hear me on Linksys IP Phone speakerphone?
If callers can't hear you when you use the speakerphone, ensure that nothing is blocking the microphone, located on the left side of the telephone under the handset cradle. Also, move closer to the microphone and face it when speaking.
Why does the caller's voice echo on my Linksys SPA-941?
If you experience an echo during calls, decrease the speaker volume by pressing the Volume key once, then use the Scroll key to adjust the volume as needed.
Instructions for controlling handset, ringer, and speaker volume levels.
Step-by-step guide for placing calls to external telephone numbers.
Instructions for placing calls to internal extensions within the system.
Setting up, using, modifying, and verifying abbreviated dial codes.
Programming the phone to reject calls from specific numbers.
Enabling and disabling the forwarding of all incoming calls.
Enabling and disabling call forwarding when the line is busy.
Enabling and disabling call forwarding for unanswered calls.
Enabling and disabling call forwarding when the phone is out of service.
Setting up and managing conference calls with multiple participants.
Forwarding calls based on Caller ID to a specified destination.
Programming and using speed dial numbers for quick dialing.
How to make calls from Microsoft Outlook using TAPI.
Step-by-step guide to install the TAPI 2.1-compliant software.
Specific configuration steps for Microsoft Outlook to use TAPI.
Steps to configure Windows operating system for TAPI functionality.
Detailed instructions for setting up TAPI service provider in Windows.
General| Lines | 4 |
|---|---|
| Audio Codecs | G.711, G.726, G.729A |
| Power over Ethernet | Yes |
| Headset Port | Yes |
| Speakerphone | Yes |
| Display | LCD |
| Ethernet Ports | 2 x 10/100 Mbps |
| Protocols | SIP |
| Operating Temperature | 0 to 40 °C |
| Humidity | 10% to 90% (non-condensing) |
| Power Supply | Included AC adapter or PoE |
To Next Page
