EasyManua.ls Logo

Linksys SPA2102

Linksys SPA2102
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Phone Adapter with Router
8
Chapter 3: Getting to Know the Phone Adapter
The Front Panel
The Front Panel
The Phone Adapter’s LEDs, which inform you about network activities, are located on the front panel.
Power Green. The Power LED lights up when the Phone Adapter is powered on and connected to
the Internet. It flashes when the Phone Adapter is not connected to the Internet. The LED
also flashes when the Phone Adapter is booting up or upgrading its firmware.
INTERNET Green. The INTERNET LED lights up when there is an active connection through the port. If
the LED is flashing, then there is traffic moving through that port.
PHONE 1/2 Green. The PHONE LED is solidly lit when a telephone or fax machine has an active or
registered connection to your Internet Telephony Service Provider (ITSP) through the
corresponding port. It flashes when the phone is being used or is off the hook.
Proceed to “Chapter 4: Getting Started.
Figure 3-2: Front Panel

Table of Contents

Other manuals for Linksys SPA2102

Related product manuals