Linksys SPA922

Linksys SPA922 User Guide
Zayo Managed Services Linksys SPA922 User Guide Page 13 of 14
Using the Feature
Activate: Using the Feature Code
1. Pick up HANDSET or press the SPEAKERPHONE KEY.
2. Dial *50. You will hear a stuttered dial tone then a normal dial tone.
3. Dial the extension of the phone you want to intercom.
Speed Dial 100
Allow a user to use a feature code and 2 digits to complete a call.
Using the Feature
Configure
1. GO OFF HOOK.
2. Press *75. You will hear a stuttered dial tone then a normal dial tone.
3. Using the KEYPAD Enter the Speed Dial 100 Code 00-99 plus the NUMBER you want to associate
with it and then press the # key.
4. The IVR will notify you whether or not the programming was successful.
Use
1. GO OFF HOOK.
2. Press #
3. Press the Speed Dial 100 Codes 00-99.
Speed Dial 8
Allow a user to hit only one button to complete a call.
Using the Feature
Configure
1. GO OFF HOOK.
2. Press *74. You will hear a stuttered dial tone then a normal dial tone.
3. Using the KEYPAD Enter the Speed Dial 8 Code 2-9 plus the NUMBER you want to associate with it
and then press the # key.
4. The IVR will notify you whether or not the programming was successful.
This Manual: http://www.manuallib.com/file/2600434