EasyManua.ls Logo

Linksys WAP11 - Page 2

Linksys WAP11
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Model No.
F
H
The Security screen will
appear. Select the level of
Wired Equivalent Privacy (WEP)
encryption for your wireless net-
work.
To automatically generate a
WEP key, enter a passphrase. If
you want to manually enter the
WEP key, leave the Passphrase
field blank.
Then click Next.
I The second Security screen
shows the WEP key. If you
entered a passphrase, then
the Key 1 field will display the
automatically generated WEP
key. If you did not enter a pass-
phrase, then enter a WEP key in
the Key 1 field. Click Next.
J On the next screen, review
your settings. If they are cor-
rect, click Yes to save these
settings. If there are any prob-
lems with the settings, click No
to exit the Setup Wizard.
E On the Enter Network Pass-
word screen, enter the Access
Point’s default password,
admin, in the Password field.
Then click OK.
F The Basic Settings screen will
appear. Enter a unique name
in the AP Name field. From the
Network Setting drop-down
menu, select Automatically if
your network has a router or
other DHCP server, or select
Static IP if your network does
not have a DHCP server. If you
selected Static IP, enter an IP
Address and Subnet Mask
appropriate for your network.
Click Next.
G The Basic Wireless Settings
screen will appear. Enter your
wireless network’s SSID, which is
like your network’s name.
Select the channel at which
the network broadcasts its wire-
less signal. Then click Next.
K
K At this point, the configuration
performed with the Setup Wiz-
ard is complete. To configure
any other access points in your
network, you can run this Setup
Wizard again. Click Exit to exit
the Setup Wizard.
Congratulations! The installation of
the Wireless-B Access Point is
complete.
WAP11_V2.8-QI-30731NC JL
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further
support.
24-hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
support@linksys.com
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
A Division of Cisco Systems, Inc.
®
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2003
Cisco Systems, Inc. All rights reserved.
E
G
H
I
J

Other manuals for Linksys WAP11

Related product manuals