A Division of Cisco Systems, Inc.
®
Model No.
Quick Installation
Model No.
Wireless
WRE54G
Range Expander
Wireless-G
A Locate an optimum location
for the Range Expander. The
best placement is usually at
the edge of your wireless net-
work.
B Fix the direction of the
antenna. Try to place it in a
position that will best cover
your wireless network. Nor-
mally, the higher you place the
Range Expander’s antenna,
the better the performance will
be. The antenna's position
enhances the receiving sensi-
tivity.
C Connect the appropriate
power plate and connect it to
a power outlet. You should
always plug your networking
gear into a surge protector.
D Press the Auto configuration
button. It will then automati-
cally detect your wireless net-
work and configure itself with
those settings.
B
IMPORTANT: The Auto configuration button is only used in networks without
WEP Security enabled. You should always have WEP Security enabled. For
greater security, install the Range Expander with the Setup Wizard, as shown
on the opposite side.
Package Contents
• One Wireless-G Range Expander
• One AC Power Adapter
• One Setup Wizard CD with User Guide
• One Quick Installation
• One registration card
IMPORTANT:If you install the Range
Expander into your network with the
Auto configuration button, you
should go into the Web Utility (as
described in the User Guide) and
enable WEP encryption.
GH
To Next Page
Need help?
General
