Need help?Do you have a question about the Linksys RE6500 and is the answer not in the manual?
General| Type | - |
|---|---|
| Maximum transfer distance | 1000 m |
| Windows operating systems supported | Yes |
| Antennas quantity | 2 |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g |
| Cabling technology | 10/100/1000Base-T(X) |
| Security algorithms | 128-bit WEP, WEP, WPA, WPA2 |
| Wi-Fi data rate (max) | 867 Mbit/s |
| Headphone outputs | 1 |
| Ethernet LAN (RJ-45) ports | 4 |
| Product color | Black |
| Cables included | LAN (RJ-45) |
| Harmonized System (HS) code | 85176990 |
Discusses FCC compliance rules and interference mitigation measures for the device.
Details FCC radiation exposure limits and installation advice for safe operation.
Covers Industry Canada compliance requirements and radio equipment regulations.
Specifies 5 GHz band usage rules to reduce potential interference with mobile satellite systems.
Covers warnings about water proximity, electrical storms, chemical exposure, and power adapter safety.
Information on compliance with EU R&TTE Directive for wireless products.
Regulatory conditions for product operation in Mexico.
Explains the EAC mark for compliance in Russia, Kazakhstan, and Belarus.
Guidance on proper disposal of electronic equipment under EU directive.
Details status lights on the front of the extender (Power, WPS).
Explains the meaning of solid white and blinking amber signal strength lights.
Describes the power switch, WPS button, Ethernet, and audio ports on the back.
Explains the function and location of the reset button on the bottom panel.
Explains the status of the WPS light during connection processes.
Guide to connect extender to existing access point via WPS.
Steps for connecting using the WPS button on router/extender.
Method for establishing connection using the Wi-Fi Protected Setup PIN.
To Next Page
