Need help?Do you have a question about the Linksys RE7000 and is the answer not in the manual?
General| Type | Network repeater |
|---|---|
| Ethernet LAN | Yes |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum transfer distance | 900 m |
| Ethernet LAN interface type | Gigabit Ethernet |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Wi-Fi data rate (max) | 1900 Mbit/s |
| Ethernet LAN (RJ-45) ports | 1 |
Weight and Dimensions| Depth | 81 mm |
|---|---|
| Width | 126 mm |
| Height | 46 mm |
| Weight | 255 g |
Details the front panel, including the indicator LED for status and signal.
Details the side panel, including WPS and Reset buttons.
Details the bottom panel, including the Ethernet port and LED.
Guides users through setting up the extender as a wireless range extender using WPS and browser methods.
Guides users through setting up the extender as a wired access point.
Explains how to connect to the extender's network and log in to the settings interface.
Details accessing settings via IP address or custom extender name.
Covers operational modes, IP settings, and main wireless network configurations.
Explains how to use WPS for easily connecting devices to the network.
Describes using the Site Survey feature to view nearby access points and signal strength.
Explains Quality of Service settings for prioritizing network traffic types.
Details the Cross-Band feature for simultaneous use of 2.4 GHz and 5 GHz bands.
Explains how to restrict network access by specifying MAC addresses.
Addresses problems where the range extender cannot connect or be accessed.
Provides solutions for unstable or intermittent connection problems.
Lists detailed technical specifications, including standards, ports, and security.
Provides environmental operating and storage conditions for the device.
To Next Page
