Linksys RE7000 User Manual

23
Cross -Band
Cross -Band is the simultaneous use of both bands for high -speed data transfer and uninterrupted
streaming and gaming. When in Auto Cross -Band (default), the range extender selects the
appropriate band (2.4 GHz or 5 GHz) when sending data from wireless clients to the Wi -Fi router.
Access Control
All devices c onnected to your range extender can access your Wi -Fi network if the extender can
access the router. U
se the Access Control feature to restrict certain devices. On the Wireless >
Access Control screen you can specify the MAC addresses of devices to allow o r den y.

Linksys RE7000 Specifications

General

Type	Network repeater
Ethernet LAN	Yes
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum transfer distance	900 m
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Wi-Fi data rate (max)	1900 Mbit/s
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	81 mm
Width	126 mm
Height	46 mm
Weight	255 g