24
Troubleshooting
Your range extender works on 2.4GHz and 5 GHz networks.
You cannot get your range extender connected
Check the position of your router and extender.
For rst -time setup, you may need to place the extender closer to the router. After you’ve
set up your extender, you can unplug it and move it to the nal location.
To reduce signal obstructions, try alternate locations for the router and extender.
Avoid placing the router and extender near metal objects, masonry walls, and
reect ive surfaces such as glass or mirrors.
Avoid placing the router and extender near other electronics that may cause
signal interference.
If you’re using Wi -Fi Protected Setup to connect, wait until the WPS button LED turns from solid
amber to o before tr ying to make the connection again.
You cannot access your range extender
To access your range extender , you must be connected to your extended network. If you currently
have wireless Internet access, the
problem may be that you have accidentally connected to a
dierent wireless network.
To x the problem on Windows computers *:
1. On your Windows desktop , c lick on the wireless icon in the system tray. A list of available
networks will appear .
2. Click your extended network name. Click Connect. In the example bel ow, the computer was
connected to another wireless network named wraith_5GHz. Your extended network na
me ,
Damaged_Beez2.4_Ext in this example, is shown selected.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
