Checking the firmware version of your router
Step 1:
Access the router’s web-based setup page. To do this, launch a web browser such as Internet Explorer or
Safari. Enter your router’s IP Address on the address bar, then press [Enter]. When the login prompt
appears, enter your router’s User name and Password.
NOTE: The default IP Address of Linksys routers is “192.168.1.1”. To view instructions on how to check the
IP address of your router, click here.
IMPORTANT: The default User name and Password is “admin”.
Step 2:
On the router’s web-based setup page, check the upper right corner of the screen for the firmware version.
NOTE: The web-based setup page may look different depending on the model of your router.
Downloading the firmware
Step 1:
Go to the Cisco HomeSupport page.
Step 2:
In the Search Support box, enter the model number of your router then press [Enter]. For instructions on
getting your router’s model number, click here.
To Next Page
Loading...
