Checking the firmware version of your router
Step 1:
Access the router’s web-based setup page. To do this, launch a web browser such as Internet Explorer or
Safari. Enter your router’s IP Address on the address bar, then press [Enter]. When the login prompt
appears, enter your router’s User name and Password.
NOTE: The default IP Address of Linksys routers is “192.168.1.1”. For instructions on how to check the IP
address of your router, click here.
IMPORTANT: The default User name and Password is “admin” but if you have used Cisco Connect to set
up your router, you may have to open the software to retrieve them. To retrieve your router User name and
Password through Cisco Connect, go to Router Settings > Advanced Settings.
Step 2:
On the router’s Setup page, check the upper right corner of the screen for the firmware version.
Downloading the firmware
To Next Page
Loading...
