Linksys WRT610N V1 User Manual

Thank you for purchasing the 6dBi Antenna Mod Kit for your Linksys router. First we will show you how
to install the antennas for your router. Next we will provide you with a tool that will help test the
performance of your newly modified router.
WRT610N V1 Antenna Installation Instructions:
1. No soldering required
2. Open the unit. You can use a torque wrench (size T10) or the sharp end of a kitchen knife will
work(we don’t recommend this).
3. Remove the UFL antenna connectors. (If you use both 2.4 ghz and 5 ghz remove top one of each)

Linksys WRT610N V1 Specifications

General

Model	WRT610N V1
Wireless Standards	802.11a/b/g/n
Frequency Bands	2.4GHz and 5GHz
USB Ports	1 x USB 2.0
Antenna Type	Internal
Power	12V DC, 1.5A
Operating Humidity	10% to 85% non-condensing
Storage Humidity	5% to 90% non-condensing
Ethernet Ports	4 Gigabit Ethernet ports
Security Features	WPA, WPA2, WEP, SPI Firewall
Wireless Data Rates	Up to 300 Mbps
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)