10
hexadecimal characters. Valid
hexadecimal characters are
“0” to “9” and “A” to “F”.
TX Key - Select the appropriate
transmit key number (The
default is 1).
Authentication - Select the
appropriate authentication
method. All points on your net-
work must use the same
authentication type (The
default is Auto).
Click Next. Proceed to Step D.
WPA Personal
Select an encryption method
and then enter a passphrase.
Encryption - Select the type of
algorithm, TKIP or AES.
Passphrase - Enter a
Passphrase, also called a
pre-shared key, of 8-63
characters.
Click Next.Proceed to Step D.
WPA2 Personal
Passphrase - Enter a
Passphrase, also called a
pre-shared key, of 8-63
characters.
Click Next. Proceed to Step D.
WPA Personal
WPA2 Personal
To Next Page
Loading...
