7
Setting Up the Adapter with
Manual Setup
Click Manual Setup on the
Available
Wireless Network
screen to set up the
Adapter manually.
A If your network has a router or
other DHCP server, click Obtain
network settings automatically
(DHCP).
If your network does not have a
DHCP server, click Specify net-
work settings. You must specify
the IP Address and Subnet Mask
on this screen. If you are unsure
about the Default Gateway and
DNS addresses, leave those
blank.
IP Address - This must be unique
to your network.
Subnet Mask - The Adapter’s
Subnet Mask must match your
wired network’s Subnet Mask.
Default Gateway - Enter the IP
address of your network’s Gate-
way here.
DNS 1 and DNS 2 - Enter the DNS
address(es) of your wired Ether-
net network here.
Click Next.
Available Wireless Network
Network Settings
To Next Page
Loading...
