5.1 Clock
It displays current system time.
5.2 Off Time
- Press OK or RIGHT navigation button to enter it.
- Use navigation buttons to select an option or adjust the value.
Off Time: available options: Off / Once / Every Day / Mon~Fri / Mon~Sat / Sat~Sun / Sun.
Time: press OK button to enter adjusting mode and press 0~9 numeric button to input the
hour and minute.
5.3 On Time
- Press OK or RIGHT navigation button to enter it.
- Use navigation buttons to select an option or adjust the value.
On Time: available options: Off / Once / Every Day / Mon~Fri / Mon~Sat / Sat~Sun / Sun.
Time: press OK button to enter adjusting mode and press 0~9 numeric button to input the
hour and minute.
Input Source / Channel / Volume: use navigations to select desired option.
5.4 Sleep Timer
This item is used to set the automatic sleep time when no signals.
Available options: Off, 10/20/30/60/90/120/180/240 minutes.
5.5 OSD Timer
This item is used to select desired OSD menu duration.
Available options: Off, 5/15/30/60 seconds.
5.6 Auto Standby
This item is used to select desired Auto Sleep (standby) duration when no operations were
done through the remote control.
Available options: Off, 3, 4 or 5 hours.
5.7 Time Zone
This item is used to select desired time zone.
To Next Page
Loading...
