Before first use
Check the product and scope of delivery
Risk of damage!
NOTE!
If opening the packaging with a sharp knife or other pointed
object, be careful to avoid damaging the product’s surface.
- Proceed carefully with opening the packaging.
1. With both hands, lift the product out of the packaging.
2. Check that the delivery is complete (see chapter “Scope of delivery/unit parts”).
3. Inspect the product and individual parts for damage. Do not operate a damaged
product, instead, contact the manufacturer via the service center listed on the
warranty card.
Initial cleaning of the product
1. Remove the packaging and all protective film, if present.
2. Clean all parts of the delivery as described in the "Cleaning" section.
The product is clean and ready for use.
Set up charging station
1. Place the charging station 2 against a wall and on a flat surface.
Make sure that there are no objects in the area shown.
115
To Next Page