2. Connect the hollow plug of the mains adapter 3 to the socket 22.
3. Plug the mains adapter 3 into a socket.
First charging
Fully charge the Robot Vacuum Cleaner 1 before using it for the first time.
1. Place the Robot Vacuum Cleaner on the charging station 2 so that the charging
contacts 17 rest on the electrodes 23.
A beep sounds and the on/off switch 9 flashes during the charging process.
As soon as charging is complete, a beep sounds and the on/off switch 9 lights up
constantly.
Prepare remote control
Insert two batteries (LR03, 1.5 V (AAA)) with correct polarity into the battery
compartment on the back of the remote control.
116
To Next Page