Linsar WM800 - Electrical Connection

27
•Yourwashingmachineissetto220-240Vand
50Hz.
•Themainscordofyourwashingmachineis
equippedwithaspecicearthedplug.Thisplug
shouldalwaysbeinsertedtoanearthedsocketof
10amps.Thecurrentvalueofthefuseshouldbe10amps.
Fusecurrentvalueofthepowerlineconnectedtothisplug
shouldalsobe10amperes.Ifyoudon’thavesucharecep-
tacleandfuseconrmingwiththis,pleasehaveitdonebya
qualiedelectrician.
•Wedonottaketheresponsibilityofthedamagesthatoc-
curduetoungroundedusage.
NOTE: Operating your machine under low
voltage will cause the life cycle of your
machine to be reduced and its perfor-
mance to be restricted.
CHAPTER -3: INSTALLATION
(ELECTRICAL CONNECTION)