Linsar WM800 - Child Lock

49
49
CHAPTER -5: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
Child lock
Toavoidprogrammeowfrombeingaffectedifprogramme
knobsarepressedortheprogrammeknobisturnedwhen
performingwashingoperationinyourmachine,childlock
isavailable.Thechildlockwillbecomeactiveafterthe
rstandsecondfunctionbuttonsonthecontrolpanelare
pressedatthesametimeandforlongerthan5seconds.
Whenitbecomesactivetheelectronicdisplaywillblink“CL”
andchildlocklightwilllightup.
Ifpressedanybuttonwhilechildlockisactive,childlock
lightwillblinkontheelectronicdisplay.
Whenanyoftheprogrammesisrunningandchildlockis
active,ifanotherprogrammeisselectedafterprogramme
knobisswitchedto0position,theprogrammealreadyrun-
ningwillresume.
Todeactivateit,itwillbesufcienttopressonthesame
buttonsformorethan5seconds.Whenchildlockisdeacti-
vated,childlocklightontheelectronicdisplaywillgooff.
Child
Lock