Linsar WM800 - Chapter-9: Troubleshooting   ; Automatic Fault Warnings and What to Do

74
Yourmachineisequippedwiththesystemswhicharecapa-
bleofbothtakingnecessaryprecautionsandwarningyouin
caseofanybreakdownbymeansofcontinuousself-check-
ingduringwashingoperations.
(*)Seethechapterregardingmaintenanceandcleaningof
yourmachine.
74
CHAPTER -10: AUTOMATIC FAULT WARNINGS AND
WHAT TO DO
E01
Thedoorof
yourmachineis
leftopen.
Thewaterpressure
orthewaterlevel
insidethemachine
islow.
Thepumpisfaultyor
pumplterisclogged
orelectricalconnec-
tionofthepumpis
faulty.
Yourmachinehas
excessiveamountof
water.
Yourmachinewilldischarge
waterbyitself.Pursuanttodis-
chargingoperation,turnoffyour
machineandunplugit.Turnoff
yourfaucetandcontactthenear-
estauthorisedservice.
Cleanthepumplter.Iftheproblem
persists,contactthenearestauthor-
isedservice.(*)
Turnonthefaucet.Mainswater
maybecut-off.Iftheproblemstill
continues,yourmachinewillstop
afterawhileautomatically.Unplug
themachine,turnoffyourfaucet
andcontactthenearestauthorised
service.
Closethemachinedoor.Ifyour
machinepersiststoindicatefault,
turnoffyourmachine,unplugit
andcontactthenearestauthorised
serviceimmediately.
E03
E02
E04
TROUBLE
CODE
POSSIBLE
FAULT
WHAT TO DO