Table of contents
Transformer operations
Running your locomotive with a Lionel transformer 3
Locking your locomotive into a single operational state 4
TrainMaster Command operations
The Command Control environment 5
Running your powered locomotive in the TrainMaster Command Control environment 6
CAB-1 commands for your locomotive 6
CAB-1 numeric keypad commands for your locomotive 7
Tuning your locomotive’s performance 7
Assigning your locomotive a new ID# 8
Building a lash-up 9
Reprogramming the Command reverse unit to restore features 10
Maintaining and servicing your locomotive
Lubricating your locomotive 10
Replacing the Traction Tires 11
Servicing your locomotive’s lamps 11
Lionel Service 12
Y
ou purchased a tough, durable
locomotive—the powered F-3 B-unit
built by Lionel. From the crisp detail and
expert decoration on the outside, to the
brute power under the hood, the Lionel F-3
B-unit is ready for duty on your model
railroad. Experience the superiority of
today’s Lionel.
Congratulations!
Features of the locomotive
• Two powerful Pullmor motors
• TrainMaster Command Control system
• Magne-Traction track gripping system
• Back-up light with directional operation
The following Lionel marks may be used throughout this instruction manual and are protected under
law. All rights reserved.
Lionel®, TrainMaster®, Odyssey®, RailSounds™, CrewTalk™, TowerCom™, DynaChuff™,
StationSounds™, Pullmor®, ElectroCoupler™, Magne-Traction®, CAB-1 Remote Controller®,
PowerMaster®, Lionel ZW®, ZW®, PowerHouse®, TMCC™, Lionelville™
To Next Page
Loading...
