To Next PageTo Next Page
Need help?Do you have a question about the Lionel F3A and is the answer not in the manual?
General| Scale | O Gauge |
|---|---|
| Power | Electric |
| Sound | Yes (Diesel Horn, Bell, etc.) |
| Lighting | Yes (Headlight, Interior Lighting) |
| Road Name | Santa Fe |
| Control | LEGACY Control System |
| Track Compatibility | Lionel O Gauge track |
| Features | Die-cast metal construction, operating couplers |
Instructions for operating the F3 set using a Lionel transformer, including power requirements and basic movement.
Details on how to use the magnetic knuckle coupler for uncoupling with remote-control track sections.
Explains how to use and enjoy the authentic sounds produced by the SignalSounds system.
Describes the function and operation of the E-Series Reversing Unit and its direction sequencing.
Guide on connecting the sound activation button for operating horn and bell sounds with transformers.
Instructions on lubricating the locomotive's moving parts to ensure longevity and smooth operation.
Specific steps for lubricating the Pullmor motor armatures for optimal performance and noise reduction.
Procedure for replacing the 14-volt lamps used for headlights and cab interior lighting.
Overview of upgrade options like Railsounds and Command Control for enhanced locomotive features.
Step-by-step instructions for installing the Railsounds circuit boards for authentic diesel sounds.
Fundamental explanation of how the Railsounds system works, including battery requirements and basic operation.
Details on various sound effects, RPM control, and operational modes of the Railsounds system.
Additional important notes and tips regarding the operation and troubleshooting of the Railsounds system.
Instructions for installing the Command Control upgrade kit to enable digital control of the locomotive.
Guide for installing the Electrocoupler upgrade kit for remote-controlled coupler operation.
Introduction to the Lionel TrainMaster Command system and its basic requirements for operation.
Steps to address and operate the F3 set using the CAB-1 remote within the Command environment.
Explains basic CAB-1 button functions for controlling the F3, including coupler release and lights.
Details on using the CAB-1 numeric keypad for advanced functions like volume, RPM control, and shutdown.
Guidance on adjusting momentum, braking, boosting, sound quality, and stall settings for optimal F3 performance.
Instructions for programming unique identification numbers for the F3 locomotives within the Command system.
Steps to program the F3A set for proper Electrocoupler function and directional lighting.
Procedure for reprogramming the R2LC circuit board to restore command mode responsiveness.
Guidelines and contact information for obtaining warranty service or factory repair for Lionel products.
