Rev: 07.18.18
Page 3
CCD-0001645
Step Operation
Unfolding Steps
1. Pull out on the top lip of the step vertically stored (Fig. 1A).
2. Pull up and out on the back of step resting on the second step (Fig 2A).
3. Unfold bottom step (Fig. 3).
Folding Steps
1. Pull up on bottom step and fold over the second step (Fig. 2A).
2. Pull up on bottom of steps and fold inward under top step (Fig. 1A).
Maintenance
Scratches
1. Clear any chipped paint or material adhering to scratched area.
2. Apply automotive grade primer to scratch.
3. Paint primed area with automotive high gloss paint.
Lubrication
1. Remove all dirt and foreign matter from hinge areas.
2. Lubricate hinge areas in between the sheet metal portions of the steps.
NOTE: Utilize a dry silicone lubricant. Wet lubricants will attract dirt and possibly cause damage to the hinge
areas.
Anti-Skid Tape
1. Inspect steps for loose, missing or damaged anti-skid tape.
2. Replace anti-skid tape as necessary.
Fig. 1 Fig. 2 Fig. 3
A
A
To Next Page
Loading...
Need help?
General
