8
lci1.com 574-537-8900 Rev: 09.17.20
Solera
®
Slide Topper
Access Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002640
Manual information may be distributed as a complete
document only, unless Lippert Components provides
explicit consent to distribute individual parts.
All manual information is subject to change without
notice. Revised editions will be available for free
download at lci1.com. Manual information is considered
factual until made obsolete by a revised version.
Please recycle all obsolete materials and contact
Lippert Components with concerns or questions.
NotesMaintenance
Fabric Care
If the Slide Topper is retracted while wet, extend the
Slide Topper and let it dry as soon as conditions allow
before retracting. This will help prevent the formation of
mildew and add greatly to the life of the awning. Mildew
does not form on the fabric itself, but on the accumulated
dust, dirt and grime.
Periodically clean vinyl or woven acrylic fabric using a
mixture of ¼ cup of dish soap and five gallons of warm
water. Liberally apply the mixture on the top of the fabric
and retract the Slide Topper for five minutes. This will
apply the mixture to the bottom of the fabric as well.
Extend the Slide Topper and hose off with fresh water.
Repeat if necessary. Allow fabric to dry before retracting.
To Previous Page
Loading...
Need help?
General
